05-09 Mustang Suspension Kits
Installation is available!
All prices include FREE SHIPPING within the continental United States
S197 Basic Lowering Kit - $710.00
Save money and time by purchasing this his kit to effectively lower your 2005-2009 Mustang. This kit addresses all of the common points in lowering your S197 suspension.
| The panhard bar is needed to correctly align the rear-end of the car once it has been lowered. On these cars, once the car has been lowered, the rear-end will swing out to one side and this bar will allow it be brought back to the correct specification. This stronger panhard bar system increases stability by removing the compliance of the soft factory rubber bushings. Soft rubber allows the axle to shift more easily underneath the car under cornering loads. | Mm5 PBAR-3 |
 | When a Mustang is lowered it loses available suspension travel and may bottom-out the suspension frequently. The lower ride height results in excessive negative camber, which often causes uneven tire wear. The Maximum Motorsports (MM) Caster/Camber Plates have the adjustment capability to allow an alignment to correct any excessive negative camber caused by lowering. The MM Caster/Camber Plates will also allow regaining lost suspension travel, which will improve both performance and ride comfort.
| Mm5CC-1 |
 | All Pro-Kits are designed for lowering your Mustang to improve looks and performance without adversely affecting ride quality.* | 35101.140 |
S197 Street Suspension Stage I - $1300.00
Increase performance by adding adjustable performance shocks and struts
| The panhard bar is needed to correctly align the rear-end of the car once it has been lowered. On these cars, once the car has been lowered, the rear-end will swing out to one side and this bar will allow it be brought back to the correct specification. This stronger panhard bar system increases stability by removing the compliance of the soft factory rubber bushings. Soft rubber allows the axle to shift more easily underneath the car under cornering loads. | Mm5 PBAR-3 |
| | When a Mustang is lowered it loses available suspension travel and may bottom-out the suspension frequently. The lower ride height results in excessive negative camber, which often causes uneven tire wear. The Maximum Motorsports (MM) Caster/Camber Plates have the adjustment capability to allow an alignment to correct any excessive negative camber caused by lowering. The MM Caster/Camber Plates will also allow regaining lost suspension travel, which will improve both performance and ride comfort.
| Mm5CC-1 |
 | A complete set of Tokico shocks and struts. D-Spec (damping specific) is a new extra-wide range adjustable damping system from Tokico. The extra-wide range makes it possible to use D-Spec for street, auto cross, drag racing or even road racing. | DSP-12 |
| | All Pro-Kits are designed for lowering your Mustang to improve looks and performance without adversely affecting ride quality.* | 35101.140 |
S197 Street Suspension Stage II - $1650.00
| The panhard bar is needed to correctly align the rear-end of the car once it has been lowered. On these cars, once the car has been lowered, the rear-end will swing out to one side and this bar will allow it be brought back to the correct specification. This stronger panhard bar system increases stability by removing the compliance of the soft factory rubber bushings. Soft rubber allows the axle to shift more easily underneath the car under cornering loads. | Mm5 PBAR-3 |
| | When a Mustang is lowered it loses available suspension travel and may bottom-out the suspension frequently. The lower ride height results in excessive negative camber, which often causes uneven tire wear. The Maximum Motorsports (MM) Caster/Camber Plates have the adjustment capability to allow an alignment to correct any excessive negative camber caused by lowering. The MM Caster/Camber Plates will also allow regaining lost suspension travel, which will improve both performance and ride comfort.
| Mm5CC-1 |
 | Eibach Anti-roll-kit Front and Rear Performance Sway Bar Kit. Performance tuned sway bars for improved handling and further reduces body roll. | 35101.320 |
| | A complete set of Tokico shocks and struts. D-Spec (damping specific) is a new extra-wide range adjustable damping system from Tokico. The extra-wide range makes it possible to use D-Spec for street, auto cross, drag racing or even road racing. | DSP-12 |
| | All Pro-Kits are designed for lowering your Mustang to improve looks and performance without adversely affecting ride quality.* | 35101.140 |
* H&R Sport, Super Sport, or Race springs can be substituted in place of the Eibach Pro-kit. Please contact us to substitute springs.
Similar packages can be put together for SN95 and Fox body cars. Individual components as well as custom packages can also be put together for you.
Contact us for information or to get a customized quotes.
Due to differences between production years and models, the actual product may differ slightly from photo.